Height rank
Kingold Century
Guangzhou
tm.jpg)
tm.jpg)
som.jpg)
crystal__cg.jpg)
som.jpg)
-
Metrics
You must be a CTBUH Member to view this resource.
Official Name
Kingold Century
Other Names
Kingold Office Building, Kingold Tower
Type
Building
Status
Completed, 2016
Country
City
Address
Function
A mixed-use tall building contains two or more functions (or uses), where each of the functions occupy a significant proportion of the tower's total space. Support areas such as car parks and mechanical plant space do not constitute mixed-use functions. Functions are denoted on CTBUH "Tallest Building" lists in descending order, e.g., "hotel/office" indicates hotel function above office function.
serviced apartments / office
Structural Material
Both the main vertical/lateral structural elements and the floor spanning systems are constructed from steel. Note that a building of steel construction with a floor system of concrete planks or concrete slab on top of steel beams is still considered a “steel” structure as the concrete elements are not acting as the primary structure.
Reinforced Concrete
Both the main vertical/lateral structural elements and the floor spanning systems are constructed from concrete which has been cast in place and utilizes steel reinforcement bars.
Precast Concrete
Both the main vertical/lateral structural elements and the floor spanning system are constructed from steel reinforced concrete which has been precast as individual components and assembled together on-site.
Mixed-Structure
Utilizes distinct systems (e.g. steel, concrete, timber), one on top of the other. For example, a steel/concrete indicates a steel structural system located on top of a concrete structural system, with the opposite true of concrete/steel.
Composite
A combination of materials (e.g. steel, concrete, timber) are used together in the main structural elements. Examples include buildings which utilize: steel columns with a floor system of reinforced concrete beams; a steel frame system with a concrete core; concrete-encased steel columns; concrete-filled steel tubes; etc. Where known, the CTBUH database breaks out the materials used in a composite building’s core, columns, and floor spanning separately.
composite
Energy Label
LEED Gold
Height
228.0 m / 748 ft
Floors Above Ground
47
Floors Below Ground
4
-
By function
You must be a CTBUH Member to view this resource.
-
By material
You must be a CTBUH Member to view this resource.
Proposed
Construction Start
Completed
Developer
Architect
Usually involved in the front end design, with a "typical" condition being that of a leadership role through either Schematic Design or Design Development, and then a monitoring role through the CD and CA phases.
MEP Engineer
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
Other Consultant
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
These are firms that consult on the design of a building's façade. May often be referred to as "Cladding," "Envelope," "Exterior Wall," or "Curtain Wall" Consultant, however, for consistency CTBUH uses the term "Façade Consultant" exclusively.
You must be a CTBUH Member to view this resource.
Developer
Architect
Usually involved in the front end design, with a "typical" condition being that of a leadership role through either Schematic Design or Design Development, and then a monitoring role through the CD and CA phases.
MEP Engineer
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
Main Contractor
The main contractor is the supervisory contractor of all construction work on a project, management of sub-contractors and vendors, etc. May be referred to as "Construction Manager," however, for consistency CTBUH uses the term "Main Contractor" exclusively.
The main contractor is the supervisory contractor of all construction work on a project, management of sub-contractors and vendors, etc. May be referred to as "Construction Manager," however, for consistency CTBUH uses the term "Main Contractor" exclusively.
China State Construction Engineering Corporation
Other Consultant
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
These are firms that consult on the design of a building's façade. May often be referred to as "Cladding," "Envelope," "Exterior Wall," or "Curtain Wall" Consultant, however, for consistency CTBUH uses the term "Façade Consultant" exclusively.
Videos
19 September 2012 | Guangzhou
Considering Place in an Integrated Approach to Tall
The rapid development of Chinese cities has provided unique opportunities to create architecture that either responds to its context or, in the case of emerging...
About Kingold Century
Located within Guangzhou’s new central business district, Kingold Century is a mixed-use tower which from the start of the design process was intended to look different. The development team wanted a building which would stand out amid the similarities of other recently completed tall buildings in China. The rectilinear tower footprint aligns to the street grid, but the tower form is then softened by curved corners and a tapering of the upper floors as it rises towards the crown. The building is set back on a small plaza on all sides and has an adjacent four story podium with a circular atrium extending southward from the tower footprint.
The tower is a composite structure rising from a deep four story basement extending to the edges of the entire site. The frame is composed of steel columns and floor plates encased with poured in place concrete with the structure maintaining a typical column layout throughout the height of the tower. The columns begin to slope inward where the tapering of the tower form begins in the upper floors. The crown is then formed through a steel frame constructed atop the main roof and clad with angled fins while maintaining the tapering form.
The facade utilizes bands of thick horizontal spandrels, deemphasizing verticality while adding definition to the corners where the spandrels increase in size and serve as railings for exterior balconies. The balconies offer outdoor spaces to the occupants in areas of the floorplate where highly coveted corner offices normally would be in a traditional interior layout. The spandrels rotate from a vertical profile at the corners to a horizontal extension of the façade to create fins for a second functional purpose: to provide passive solar shading and reduce energy consumption in the warm and humid climate of southern China. The shading features also provide for interplay of light and shadow, changing the visual appearance of the façade throughout the day.
Subscribe below to receive periodic updates from CTBUH on the latest Tall Building and Urban news and CTBUH initiatives, including our monthly newsletter. Fields with a red asterisk (*) next to them are required.
View our privacy policy