One Metropolitan Square - The Skyscraper Center

Facts

You must be a CTBUH Member to view this resource.

Metrics

Height 180.8 m / 593 ft

Floors 42

Official Name

The current legal building name.

One Metropolitan Square

Other Names

Other names the building has commonly been known as, including former names, common informal names, local names, etc.

Metropolitan Square Tower

Type

CTBUH collects data on two major types of tall structures: 'Buildings' and 'Telecommunications / Observation Towers.' A 'Building' is a structure where at least 50% of the height is occupied by usable floor area. A 'Telecommunications / Observation Tower' is a structure where less than 50% of the structure's height is occupied by usable floor area. Only 'Buildings' are eligible for the CTBUH 'Tallest Buildings' lists.

Building

Status

Completed

Architecturally Topped Out

Structurally Topped Out

Under Construction

Proposed

On Hold

Never Completed

Vision

Competition Entry

Canceled

Proposed Renovation

Under Renovation

Renovated

Under Demolition

Demolished

Completed, 1988

Country

The CTBUH follows the United Nations's definition of Country, and thus uses the lists and codes established by that organization.

United States

City

The CTBUH follows the United Nations's definition of City, and thus uses the lists and codes established by that organization.

St. Louis

Address

211 North Broadway

Postal Code

63102

Function

A single-function tall building is defined as one where 85% or more of its usable floor area is dedicated to a single usage. Thus a building with 90% office floor area would be said to be an "office" building, irrespective of other minor functions it may also contain.

A mixed-use tall building contains two or more functions (or uses), where each of the functions occupy a significant proportion of the tower's total space. Support areas such as car parks and mechanical plant space do not constitute mixed-use functions. Functions are denoted on CTBUH "Tallest Building" lists in descending order, e.g., "hotel/office" indicates hotel function above office function.

office

Structural Material

Steel
Both the main vertical/lateral structural elements and the floor spanning systems are constructed from steel. Note that a building of steel construction with a floor system of concrete planks or concrete slab on top of steel beams is still considered a “steel” structure as the concrete elements are not acting as the primary structure.

Reinforced Concrete
Both the main vertical/lateral structural elements and the floor spanning systems are constructed from concrete which has been cast in place and utilizes steel reinforcement bars.

Precast Concrete
Both the main vertical/lateral structural elements and the floor spanning system are constructed from steel reinforced concrete which has been precast as individual components and assembled together on-site.

Mixed-Structure
Utilizes distinct systems (e.g. steel, concrete, timber), one on top of the other. For example, a steel/concrete indicates a steel structural system located on top of a concrete structural system, with the opposite true of concrete/steel.

Composite
A combination of materials (e.g. steel, concrete, timber) are used together in the main structural elements. Examples include buildings which utilize: steel columns with a floor system of reinforced concrete beams; a steel frame system with a concrete core; concrete-encased steel columns; concrete-filled steel tubes; etc. Where known, the CTBUH database breaks out the materials used in a composite building’s core, columns, and floor spanning separately.

composite

Core

Reinforced Concrete

Columns

Steel

Floor Spanning

Steel

Height

Architectural

Height is measured from the level of the lowest, significant, open-air, pedestrian entrance to the architectural top of the building, including spires, but not including antennae, signage, flag poles or other functional-technical equipment. This measurement is the most widely utilized and is employed to define the Council on Tall Buildings and Urban Habitat (CTBUH) rankings of the "World's Tallest Buildings."

180.8 m / 593 ft

To Tip

Height is measured from the level of the lowest, significant, open-air, pedestrian entrance to the highest point of the building, irrespective of material or function of the highest element (i.e., including antennae, flagpoles, signage and other functional-technical equipment).

180.8 m / 593 ft

Floors Above Ground

The number of floors above ground should include the ground floor level and be the number of main floors above ground, including any significant mezzanine floors and major mechanical plant floors. Mechanical mezzanines should not be included if they have a significantly smaller floor area than the major floors below. Similarly, mechanical penthouses or plant rooms protruding above the general roof area should not be counted. Note: CTBUH floor counts may differ from published accounts, as it is common in some regions of the world for certain floor levels not to be included (e.g., the level 4, 14, 24, etc. in Hong Kong).

Tower GFA

Tower GFA refers to the total gross floor area within the tower footprint, not including adjoining podiums, connected buildings or other towers within the development.

88,558 m² / 953,230 ft²

Rankings

By Location

You must be a CTBUH Member to view this resource.

By function

You must be a CTBUH Member to view this resource.

By material

2418

Tallest in the World

422

Tallest in North America

Tallest in St. Louis

1080

Tallest Office Building in the World

243

Tallest Office Building in North America

Tallest Office Building in St. Louis

567

Tallest Composite Building in the World

Tallest Composite Building in North America

Tallest Composite Building in United States

Tallest Composite Building in St. Louis

CTBUH Member Companies Involved

All Companies Involved

Architect

Design

Usually involved in the front end design, with a "typical" condition being that of a leadership role through either Schematic Design or Design Development, and then a monitoring role through the CD and CA phases.

HOK, Inc.

Structural Engineer

Design

The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.