Filter by
You must be a CTBUH Member to view this resource.
Veer Towers East
Building
Completed, 2010
89109
residential
concrete
LEED Gold
137.0 m / 449 ft
36
2
4
Proposed
Construction Start
Completed
Usually involved in the front end design, with a "typical" condition being that of a leadership role through either Schematic Design or Design Development, and then a monitoring role through the CD and CA phases.
Usually takes on the balance of the architectural effort not executed by the "Design Architect," typically responsible for the construction documents, conforming to local codes, etc. May often be referred to as "Executive," "Associate," or "Local" Architect, however, for consistency CTBUH uses the term "Architect of Record" exclusively.
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
These are firms that consult on the design of a building's façade. May often be referred to as "Cladding," "Envelope," "Exterior Wall," or "Curtain Wall" Consultant, however, for consistency CTBUH uses the term "Façade Consultant" exclusively.
You must be a CTBUH Member to view this resource.
Usually involved in the front end design, with a "typical" condition being that of a leadership role through either Schematic Design or Design Development, and then a monitoring role through the CD and CA phases.
Usually takes on the balance of the architectural effort not executed by the "Design Architect," typically responsible for the construction documents, conforming to local codes, etc. May often be referred to as "Executive," "Associate," or "Local" Architect, however, for consistency CTBUH uses the term "Architect of Record" exclusively.
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
The main contractor is the supervisory contractor of all construction work on a project, management of sub-contractors and vendors, etc. May be referred to as "Construction Manager," however, for consistency CTBUH uses the term "Main Contractor" exclusively.
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
These are firms that consult on the design of a building's façade. May often be referred to as "Cladding," "Envelope," "Exterior Wall," or "Curtain Wall" Consultant, however, for consistency CTBUH uses the term "Façade Consultant" exclusively.
Best Tall Building Americas 2010 Award of Excellence
2010 CTBUH Awards
Helmut Jahn Discusses His Lifetime's Work
18 October 2012 - Awards Symposium Video
Veer Towers Chosen as Featured Building
15 April 2011 - Featured Building
11 June 2013 | Las Vegas
City-Scapes: Transformations + Interventions
In our journey from Chicago to New York, the United States, South Africa, Europe, the Mideast to Asia/China, the tall building has always been tied...
10 October 2011
Francisco J. Gonzalez-Pulido, Murphy Jahn
This presentation will focus in the aspects of our practice that deal with the issues that we consider relevant for the future of design and...
Part of the new CityCenter complex in Las Vegas, Veer Towers attempts to blur the boundaries between the public and private realm while finding the right balance between becoming an integral part of the city while also giving the buildings and spaces a unique and iconic character. In approaching the design of the towers, the context was not a historical background to build upon, but the framework to establish a new order and create a new image. The Veer Towers lean at five degrees in opposite directions creating an architecture that is at once robust and delicate.
There’s no reflective glass used on the project, making Veer the first truly transparent building in Las Vegas. Extensive use of high performance low-E coating glazing maximizes the introduction of day lighting and views to the outside, which in conjunction with the use of exterior shades and a 57% ceramic frit in 50% of the building’s envelope, provide all the shading to control and reduce the solar loads. Staggered panels of clear and fritted yellow glass animate the façades and give the complex a welcome shot of color while horizontal louvers add a depth and texture to the exterior as well as provide shade from the intense desert sun.
The load-bearing structure is a simple and repetitive system with a Z-shaped central core. The cores of both towers are strategically positioned on the building’s footprint in order to minimize gravity overturning effects, and they continue vertically up the entire building height. While all interior columns rise straight vertically, the tower columns on the north and south building elevations are inclined to follow the lean of the towers.
The south façade of the main building lobbies are expressed with slender concrete columns free standing at over 24m (80ft) high and inclined to articulate the lean of the towers. Due to space constraints and the requirement to maximize usable lobby space, composite column construction was introduced. The architectural design of the main lobby required a unique solution to the heating, cooling and ventilation due to the distinctive nature of these spaces. Each lobby is a multi-level space with a large expanse of glass on the south façade which runs the full height of the space. It provides large quantities of natural light to the lobby and large solar heat gains in summer and heat losses in winter. After studying the space loads and using computational fluid dynamics (CFD) analysis it was determined that the best solution for conditioning the space efficiently was a radiant floor system using chilled and heated water with displacement ventilation providing the required outside air ventilation and supplemental cooling/heating. A radiant cooling surface allows the space temperature to be higher than traditional all-air design solutions reducing energy consumption while maintaining occupant comfort.
Heating and cooling of the apartments is provided by vertical fan coil units. The horizontal sun screen blades provide shading on the east, south and west façades and reduce the energy consumption while minimizing the technical equipment requirements and maximizing occupant comfort.
Responsible uses of appropriate technologies provide an expressive means to realize this project in a sustainable way. The use of construction waste management techniques including diverting 50 to 75% of construction waste from landfills, the use of materials locally or regionally produced and manufactured, recycled materials and wood certified products, result in a significant reduction in environmental impact. Storm water filtration systems controlled flow drainage, use of storm water for irrigation and grey water systems all contribute to water conservation and the reduction in the use of potable municipal water resulting in saved utility charges and reduced impact on natural resources.
Best Tall Building Americas 2010 Award of Excellence
2010 CTBUH Awards
11 June 2013 | Las Vegas
City-Scapes: Transformations + Interventions
In our journey from Chicago to New York, the United States, South Africa, Europe, the Mideast to Asia/China, the tall building has always been tied...
18 October 2012 | Las Vegas
Lynn S. Beedle Lifetime Achievement Award: Archi-neering Tall
Never predictable, never simplistic, Helmut Jahn has developed a complex portfolio of iconic buildings around the world. Standout projects include the Sony Center in Berlin,...
18 October 2012
Never predictable, never simplistic, Helmut Jahn has developed a complex portfolio of iconic buildings around the world. Standout projects include the Sony Center in Berlin, Xerox Center in Chicago, Liberty Place in Philadelphia and the MGM Veer Towers in Las Vegas. Once defined as a modernist, he broke away from rigid labels to create his own blends of efficient structures, paving the way for a new era of sustainable buildings.
Subscribe below to receive periodic updates from CTBUH on the latest Tall Building and Urban news and CTBUH initiatives, including our monthly newsletter. Fields with a red asterisk (*) next to them are required.
View our privacy policy